Dashcam Installation Tips for Beginners: A Step-by-Step Guide

Dashcam Installation Tips for Beginners: A Step-by-Step Guide

Hello DashVision community! Today, we're focusing on a topic that every dashcam owner needs to know about: proper installation. While professional installation is always an option, installing a dashcam yourself can save money and grant you a better understanding of how your device works. Don’t worry if you’re not tech-savvy – our step-by-step guide will help you install your dashcam like a pro.

Step 1: Choose the Right Position

The first step in installing your dashcam is determining the best position for it. Ideally, it should be mounted in the middle of your windshield for a comprehensive view of the road. Remember to place it behind the rearview mirror to avoid obstructing your vision while driving. Also, ensure it's positioned within the sweep of your windscreen wiper to keep the view clear in rainy conditions.

Step 2: Mount the Dashcam

Dashcams usually come with a suction mount or adhesive mount. If it's a suction mount, place it on the desired spot and push down on the lever to create suction. If it's adhesive, peel off the backing and press the mount onto the glass firmly. Position your dashcam on the mount and make sure it's secure.

Step 3: Connect the Power Source

Connect the power cable to the dashcam, then plug the other end into your vehicle's 12-volt power outlet (the cigarette lighter). For a cleaner look, you can route the cable around the edges of your windshield, tucking it under the roof lining and down the side of the dashboard. Remember to leave enough slack so the cable isn't taut when the car is moving.

Step 4: Adjust the Camera Angle

Once the dashcam is mounted and powered, adjust the camera angle. The road and sky should make up 60/40 of the frame, respectively. This setting provides a comprehensive view of the road while still capturing relevant details like traffic lights and road signs.

Step 5: Set Up the Dashcam Settings

Every dashcam model has a different setup process, but generally, you’ll need to set the date, time, and any other preferences. Consult your dashcam's user manual for specific instructions.

Step 6: Test the Dashcam

Lastly, before you hit the road, conduct a test run. Check the dashcam’s field of view and playback some footage to make sure everything works correctly. Adjust the camera angle if necessary.

Extra Tip: Hardwiring Your Dashcam

For a more professional installation, you can opt to hardwire your dashcam directly to your car's fuse box. This provides a cleaner look without visible wires and can allow for features like parking mode. However, this requires some electrical knowledge and may be best left to professionals if you're not comfortable doing it yourself.

Installing a dashcam is relatively straightforward with the right instructions. With this guide, you should be well on your way to setting up your dashcam and enjoying safer, more secure journeys. Remember, the team at DashVision.co.uk is always here to assist with any questions or concerns you may have about your dashcam. Safe travels!

Back to blog